|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
869 MHz to 1990 MHz Quadrature Modulators ADL5590/ADL5591 FEATURES Operating frequencies ADL5590: 869 MHz to 960 MHz ADL5591: 1805 MHz to 1990 MHz Output compression point P1dB: 16 dBm Output third-order intercept point OIP3 ADL5590: 29 dBm @ 900 MHz ADL5591: 30 dBm @ 1900 MHz Noise floor: -157 dBm/Hz Sideband suppression ADL5590: <-50 dBc @ 900 MHz ADL5591: <-47 dBc @ 1900 MHz Baseband common-mode bias: 1.5 V LO leakage ADL5590: -50 dBc @ 900 MHz, POUT = 5 dBm ADL5591: -44 dBc @ 1900 MHz, POUT = 5 dBm Single supply: 4.75 V to 5.25 V Package: 36-lead, 6 mm x 6 mm LFCSP FUNCTIONAL BLOCK DIAGRAM 36 35 34 33 32 31 30 29 28 GND GND GND VPS5 GND VPS4 GND GND GND GND GND VPS1 LOIP GND LOIN GND GND GND 1 2 3 4 5 6 7 8 9 ADL5590/ ADL5591 QUADRATURE PHASE SPLITTER 27 26 25 24 23 22 21 GND QBBP QBBN GND VOUT GND IBBN 20 IBBP 19 GND 10 11 12 13 14 15 16 17 18 Figure 1. APPLICATIONS Wireless infrastructure Optimized for GSM transmitters GENERAL DESCRIPTION This family of monolithic RF quadrature modulators is designed for use from 869 MHz to 960 MHz and from 1805 MHz to 1990 MHz. Excellent phase accuracy and amplitude balance enable high performance, direct RF modulation for communications systems. The ADL5590 and ADL5591 can be used as direct RF modulators in digital communications systems such as those using the Global System for Mobile Communications (GSM) network. In addition, the parts are compatible with enhanced data rates for GSM evolution (EDGE). This family is fabricated using an advanced silicon-germanium bipolar process from Analog Devices, Inc., and is available in a 36-lead, exposed paddle LFCSP. The devices operate from -40C to +85C. Rev. 0 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 (c)2007 Analog Devices, Inc. All rights reserved. 06661-001 GND GND GND VPS2 GND VPS3 GND GND GND ADL5590/ADL5591 TABLE OF CONTENTS Features .............................................................................................. 1 Applications....................................................................................... 1 General Description ......................................................................... 1 Functional Block Diagram .............................................................. 1 Revision History ............................................................................... 2 Specifications..................................................................................... 3 Absolute Maximum Ratings ............................................................5 ESD Caution...................................................................................5 Pin Configuration and Function Descriptions..............................6 Basic Connections .............................................................................7 Outline Dimensions ..........................................................................8 Ordering Guide .............................................................................8 REVISION HISTORY 5/07--Revision 0: Initial Version Rev. 0 | Page 2 of 8 ADL5590/ADL5591 SPECIFICATIONS VS = 5 V; TA= 25C; LO = 2 dBm; baseband I/Q amplitude = 1 V p-p differential sine waves in quadrature with a 1.5 V dc bias; baseband I/Q frequency (fBB) = 1 MHz, unless otherwise noted. Table 1. Parameter Operating Frequency Range ADL5590 ADL5590 @ fRF = 880 MHz Output Power vs. Frequency vs. Temperature Sideband Suppression LO Leakage Output Return Loss Output P1 dB Output IP3 Output IP2 Output Noise Density Output Noise Floor Modulation Spectrum Conditions Min 869 1805 VIQ = 1.0 V p-p differential fRF = 869 MHz to 894 MHz 0C to 85C -25C to 0C 3.75 5.9 0.1 0.01 0.01 -50 -50 2.8 16 29 66 -155 -156.6 -42.5 -71.1 -78.5 -79.1 0.5 1.5 3.5 5.7 0.1 0.01 0.01 -50 -50 3.2 16 29 70 -156.6 -42.5 -71.1 -78.5 -79.1 0.4 1.4 3.0 5.0 0.1 0.011 0.011 -47 -44 7.0 7.75 Typ Max 960 1990 8.0 Unit MHz MHz dBm dB dB/C dB/C dBc dBc dB dBm dBm dBm dBc/Hz dBm/Hz dBc dBc dBc dBc % % dBm dB dB/C dB/C dBc dBc dB dBm dBm dBm dBm/Hz dBc dBc dBc dBc % % dBm dB dB/C dB/C dBc dBc RMS Error Vector Magnitude Peak Error Vector Magnitude ADL5590 @ fRF = 940 MHz Output Power vs. Frequency vs. Temperature Sideband Suppression LO Leakage Output Return Loss Output P1 dB Output IP3 Output IP2 Output Noise Floor Modulation Spectrum f1BB = 3.5 MHz, f2BB = 4.5 MHz, POUT = 0 dBm per tone f1BB = 3.5 MHz, f2BB = 4.5 MHz, POUT = 0 dBm per tone POUT = 5 dBm, 6 MHz carrier offset Baseband inputs biased to 1.5 V Relative to carrier in 30 kHz, POUT = 3 dBm, 8 PSK 250 kHz carrier offset 400 kHz carrier offset 600 kHz carrier offset 1.2 MHz carrier offset POUT = 3 dBm, 8 PSK POUT = 3 dBm, 8 PSK VIQ = 1.0 V p-p differential fRF = 925 MHz to 960 MHz 0C to 85C -25C to 0C RMS Error Vector Magnitude Peak Error Vector Magnitude ADL5591 @ fRF = 1850 MHz Output Power vs. Frequency vs. Temperature Sideband Suppression LO Leakage f1BB = 3.5 MHz, f2BB = 4.5 MHz, POUT = 0 dBm per tone f1BB = 3.5 MHz, f2BB = 4.5 MHz, POUT = 0 dBm per tone Baseband inputs biased to 1.5 V Relative to carrier in 30 kHz, POUT = 3 dBm, 8 PSK 250 kHz carrier offset 400 kHz carrier offset 600 kHz carrier offset 1.2 MHz carrier offset POUT = 3 dBm, 8 PSK POUT = 3 dBm, 8 PSK fRF = 1850 MHz VIQ = 1.0 V p-p differential fRF = 1805 MHz to 1880 MHz 0C to 85C -25C to 0C Rev. 0 | Page 3 of 8 ADL5590/ADL5591 Parameter Output Return Loss Output P1 dB Output IP3 Output IP2 Output Noise Density Output Noise Floor Modulation Spectrum Conditions Min Typ 5.4 16 30 60 -156 -157 -42.5 -71.3 -79.4 -80.2 0.5 1.7 2.5 4.7 0.1 +0.011 +0.011 -48 -44 6.0 16 30 60 -156 157 -42.5 -71.4 -79.7 -80.5 0.5 1.6 -1 ADL5590 @ fRF = 880 MHz ADL5591 @ fRF = 1850 MHz Pins IBBP, IBBN, QBBP, QBBN +2 7.5 10.7 1.5 250 9 Pin VPS1 to Pin VPS5 Full specification Degraded specification 4.75 4.5 170 170 5.25 5.5 +5 6.5 Max Unit dB dBm dBm dBm dBc/Hz dBm/Hz dBc dBc dBc dBc % % dBm dB dB/C dB/C dBc dBc dB dBm dBm dBm dBc/Hz dBm/Hz dBc dBc dBc dBc % % dBm dB dB V MHz k V V mA mA RMS Error Vector Magnitude Peak Error Vector Magnitude ADL5591 @ fRF = 1960 MHz Output Power vs. Frequency vs. Temperature Sideband Suppression LO Leakage Output Return Loss Output P1dB Output IP3 Output IP2 Output Noise Density Output Noise Floor Modulation Spectrum f1BB = 3.5 MHz, f2BB = 4.5 MHz, POUT = -1 dBm per tone f1BB = 3.5 MHz, f2BB = 4.5 MHz, POUT = -1 dBm per tone POUT = 5 dBm, 6 MHz carrier offset Baseband inputs biased to 1.5 V Relative to carrier in 30 kHz, POUT = 3 dBm, 8 PSK 250 kHz carrier offset 400 kHz carrier offset 600 kHz carrier offset 1.2 MHz carrier offset POUT = 3 dBm, 8 PSK POUT = 3 dBm, 8 PSK VIQ = 1.0 V p-p differential fRF = 1930 MHz to 1990 MHz 0C to 85C -25C to 0C RMS Error Vector Magnitude Peak Error Vector Magnitude LO INPUTS LO Drive Level 1 Input Return Loss BASEBAND INPUTS I and Q Input Bias Level Bandwidth (3 dB) Differential Input Impedance POWER SUPPLIES Voltage Supply Current ADL5590 ADL5591 1 f1BB = 3.5 MHz, f2BB = 4.5 MHz, POUT = -1 dBm per tone f1BB = 3.5 MHz, f2BB = 4.5 MHz, POUT = -1 dBm per tone POUT = 5 dBm, 6 MHz carrier offset Baseband inputs biased to 1.5 V Relative to carrier in 30 kHz, POUT = 3 dBm, 8 PSK 250 kHz carrier offset 400 kHz carrier offset 600 kHz carrier offset 1.2 MHz carrier offset POUT = 3 dBm, 8 PSK POUT = 3 dBm, 8 PSK LOIP, LOIN LO drive in excess of 5 dBm can be provided to further reduce noise at 6 MHz carrier offset. Rev. 0 | Page 4 of 8 ADL5590/ADL5591 ABSOLUTE MAXIMUM RATINGS Table 2. Parameter Supply Voltage, VPS1 to VPS5 IBBP, IBBN, QBBP, QBBN LOIP Internal Power Dissipation JA (Exposed Paddle Soldered Down) Maximum Junction Temperature Operating Temperature Range Storage Temperature Range Maximum Soldering Temperature Rating 5.5 V 0 V, 3 V 10 dBm 1155 mW 40C/W 132C -40C to +85C -65C to +150C 260C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ESD CAUTION Rev. 0 | Page 5 of 8 ADL5590/ADL5591 PIN CONFIGURATION AND FUNCTION DESCRIPTIONS 36 35 34 33 32 31 30 29 28 GND GND VPS1 LOIP GND LOIN GND GND GND 1 2 3 4 5 6 7 8 9 GND GND GND VPS5 GND VPS4 GND GND GND PIN 1 INDICATOR ADL5590/ ADL5591 TOP VIEW (Not to Scale) 27 26 25 24 23 22 21 20 19 GND QBBP QBBN GND VOUT GND IBBN IBBP GND GND GND GND VPS2 GND VPS3 GND GND GND 10 11 12 13 14 15 16 17 18 Figure 2. ADL5590/ADL5591 Pin Configuration Table 3. Pin Function Descriptions Pin No. 1, 2, 5, 7 to 12, 14, 16 to 19, 22, 24, 27 to 30, 32, 34 to 36 3, 13, 15, 31, 33 4, 6 20, 21, 25, 26 Mnemonic GND Description Ground. Connect to ground plane via a low impedance path. VPS1, VPS2, VPS3, VPS4, VPS5 LOIP, LOIN IBBP, IBBN, QBBN, QBBP 23 - VOUT Exposed Paddle Positive Supply Voltage. All pins should be connected to the same supply. To ensure adequate external bypassing, connect 0.1 F capacitors between each pin and ground. Local Oscillator Input. 50 single-ended local oscillator input. Pins must be ac-coupled. AC-couple LOIN to ground and drive LO through LOIP. Baseband Inputs. Differential in-phase and quadrature baseband inputs. These high impedance inputs must be dc-biased to approximately 1.5 V dc. These inputs are not self-biased and must be externally biased. RF Output. Single-ended, 50 , internally biased RF output. Pin must be ac-coupled to the load. Exposed Paddle. Connect to ground plane via a low impedance path. Rev. 0 | Page 6 of 8 06661-002 ADL5590/ADL5591 BASIC CONNECTIONS C8 0.1F VCC VPS5 VPS4 GND GND GND GND GND GND 29 C7 0.1F VCC GND 28 32 31 34 36 GND C1 0.1F GND VPS1 LOIP C2 C3 100pF 100pF GND LOIN GND GND GND 1 2 3 4 5 6 7 8 9 ADL5590/ ADL5591 35 33 30 27 26 25 GND QBBP QBBN GND VOUT GND IBBN IBBP GND I- I+ Q+ Q- C6 100pF RFOUT VCC LO QUADRATURE PHASE SPLITTER 24 23 22 21 20 19 14 15 16 17 10 11 12 VPS2 13 VPS3 GND GND GND GND GND GND C4 0.1F C5 0.1F Figure 3. Basic Connections for Operation Rev. 0 | Page 7 of 8 06661-003 VCC GND VCC 18 ADL5590/ADL5591 OUTLINE DIMENSIONS 6.00 BSC SQ 0.60 MAX 0.60 MAX 28 27 36 PIN 1 INDICATOR 1 PIN 1 INDICATOR TOP VIEW 5.75 BCS SQ 0.50 BSC EXPOSED PAD (BOT TOM VIEW) 0.75 0.55 0.35 3.80 3.70 SQ 3.60 10 9 19 18 0.20 MIN 4.50 REF 1.00 0.85 0.80 SEATING PLANE 12 MAX 0.80 MAX 0.65 TYP 0.05 MAX 0.02 NOM COPLANARITY 0.08 0.20 REF COMPLIANT TO JEDEC STANDARDS MO-220-VJJD-1 Figure 4. 36-Lead Lead Frame Chip Scale Package [LFCSP_VQ] 6 mm x 6 mm Body, Very Thin Quad (CP-36-1) Dimensions shown in millimeters ORDERING GUIDE Model ADL5590ACPZ-R7 1 ADL5591ACPZ-R71 1 Temperature Range -40C to +85C -40C to +85C Package Description 36-Lead LFCSP_VQ, 7" Tape and Reel 36-Lead LFCSP_VQ, 7" Tape and Reel Package Option CP-36-1 CP-36-1 Z = RoHS Compliant Part. (c)2007 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D06661-0-5/07(0) Rev. 0 | Page 8 of 8 022307-A 0.30 0.25 0.18 |
Price & Availability of ADL5591ACPZ-R7 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |